Outdated wood paneling. Three out of the four houses we’ve owned have had this popular 60s and 70s material. That’s what we get for buying old homes!
In the second home we purchased, they had textured over most of it. In the third home, we ripped it out and did sheetrock with my dad’s (who is very good at sheetrock) help. For our current house, most of it had been painted over. But the paneling in our guest bath had been left untouched and with the updated finishes we chose it was not the look I wanted. Sheetrock is not something the hubby and I are great at and we really didn’t want to spend the money either so I came up with a different solution – board and batten!
If you’ve read our remodeled laundry room post, you know that this remodel was not in our immediate plans. But after getting the news that we had a busted sewer line that had to be replaced, we decided to spend a little extra and refinish these two spaces since they were the spaces directly affected by the sewer line.
This post contains affiliate links for your convenience. See my disclosure policy here.
From Paneling to Board and Batten
I love the look of board and batten. In our previous home, we did board and batten in our master bedroom on the wall that our bed sat against. As I studied the paneling I thought about our options. It hit me that, with a few modifications, we could do it here, too. The paneling only took up a third of the walls. The rest was covered in wallpaper that we had to texture over and paint. I thought the board and batten would really stand out with the marble tile we had settled on and give the space some character.
What you need:
Thin strips of wood (we used 2×1/4″)
Nail gun, nails
Paint color of choice
Measure and Fill
Start by measuring and marking the grooves. Fill in the grooves that will not be covered by wood with putty. Once it dries, you may have to fill it in a second time. For me, the first round of putty sunk into the groove some. The putty we used went on pink and turned white when it was dry which was pretty helpful!
Sand and Wipe
Once completely dry, sand putty down until smooth and even with the rest of the paneling. This gets messy and you’ll need to wipe down the surfaces before moving on.
Install Base Trim
Now you’re ready for your base trim. You may choose to reuse yours, but ours was almost 50 years old and disgusting. We replaced it with a new thicker trim.
Once you’ve measured your base trim, I suggest painting/staining before installing it. It will make life so much easier. My hubby painted it and then installed it around the room. Use putty to fill in the nail holes. Once dry, you can lightly sand and touch up with your paint or stain.
Install Horizontal Trim
Now you’re ready for the thin pieces of trim. You will install this horizontally on top of the base trim and underneath the top decorative trim piece. Cut, paint (wish I had done this first!), and use your nail gun to secure it to the wall. We also had to replace our corner trim because it had split and broken off.
Install Vertical Trim
Using this same trim, measure the vertical length and cut the number of pieces needed to go around the paneling. Make sure they’re spaced evenly and covering the unfilled grooves. Attach with nail gun.
Install Chair Rail
You’re almost there! For the last step, we used the same thin board but laid it flat on top of the decorative trim piece to create a small ledge. We attached it to the trim with the nail gun and voila!
We filled in all of the holes with putty and caulked any gaps to give it a finished look. Then we painted over everything with primer first and then used Valspar’s Cabinet Enamel in white to complete the look. Here it is after the first coat of primer:
Done! I love how it turned out!! For an inexpensive and fairly easy update, it really made this bathroom stand out! The contrast against the marble tile is so pretty and it really brightens up this once dingy space.
If you have old, outdated paneling and aren’t ready to rip it out and do sheetrock, I encourage you to give this option a try! No one will ever know that it used to be paneling!
In my next post I’ll (finally!) reveal our full guest bath makeover so stay tuned! (UPDATE: See the bathroom makeover here!)
You may also be interested in:
Pin for later: